Fastest, Safest Man Entry into the Vessel
Entry Safe Services
Entry Safe along with chemistry offers services. Our Engineering and Planning is second to none and we have wide experience in dealing with different kind of equipment and systems. Each system has complexities based on the feed, processing, unities available and needs to be planned individually to ensure successful decontamination of the system.
COLUMN AND TOWER DECONTAMINATION
Entry Safe can treat any size column or tower utilizing Steam Vapor Application Process. Because of the size of numerous towers, dissemination or fill strategies are impractical. In the Steam Vapor Application Process, proprietary chemistry is injected into the steam lines to travel the circuit and decontaminate the equipment.
Read MoreTOWER BOTTOM TREATMENT
There are numerous units in the refinery that generate substantial amount of sludge during production. Amid a turnaround these units can be extremely hard to clean because of development of polymers, black-tops, substantial lube oils, and deposits.
Read MoreDESALTER AND DRUM DECONTAMINATION
Vessels, for example, desalters, separators, and drums are customarily extremely hard to clean. Regular industry practice require fresh air masks to enter the vessel and physically uncover slime in the unit. Cleaning the vessel can involve various steps and can be exceptionally risky. At Entry Safe, we utilize Entry Safe™ Decon Technology to wipe out contaminants and condition the solids without the need of any man entry.
Read MoreTREATMENTS FOR PYROPHORIC
Pyrophoric material such as iron sulfide is frequently found in refinery equipment. When the equipment is opened to the atmosphere for maintenance, an exothermic reaction can take place that may cause injury to personnel and catastrophic damage to equipment.We create a custom plan for each unique tower or column with information such as…
Read MoreHEAT EXCHANGER OPTIMIZATION
Entry Safe decontaminates Heat Exchanger trains effectively using the Steam Vapour Decontamination methodology. When the heat exchanger efficiency in between turnarounds drop, Operators must make the difficult decision to run at low efficiency or stop production to clean the heat exchangers. Tetrachem Decon Technology offers an alternative…
Read MoreFLARE SYSTEM DECONTAMINATION
Entry Safe is highly experienced in the decontamination of flare systems including piping, drums and flare stacks. Our Entry Safe™ eliminates any benzene, LEL, hydrogen sulphide and pyrophoric iron sulfide. Careful planning is required to successfully decontaminate a flare system to avoid re-contamination and minimize injection points.
Read MoreSOME OF OUR FACTS
Vessel Entry possible in Less than 12 hours
LEL, Hydro carbon, Pyrophoric & H2S
Less than 1 ppm Benzene
Over 80% time savings as compared to using traditional steaming and cleaning methods







